Quick Order

Offset accessories for single action door. Top centre, bottom strap, cover caps top, two pieces, bottom single piece-Right handed, Mill finish

Rack and pinion fire rated door closer with std. arm - power ajustable EN size 2/3/4 by altering postion of door closer and independent closing valves, latching speed adjustable by pinion arm at 90?, and all adjustment screws face fixed. Silver finish. As per EN 1154 marking suitable for door width 850mm - 1100mm and weight upto 80 Kgs.CE Merked.

Cam action fire rated door closer with slide channel arm suitable for push or pull side fixing opening angle upto 120? with limit stay. Spring size EN 3-6 as per EN 1154 marking suitable for door width 950mm - 1400mm and weight upto 120 kgs with CE marked. Silver finish.

Floor Spring with adjustable power EN 2-4 and closing speed. with full backcheck with cement box, std. spindle (extended spindle for special floor height requirements) and SSS cover top plate. With hold open. Suitable for door width = 850mm - 1100mm, Max door Weight = 120 Kg As per EN 1154 and CE marking. Finish: Satin stainless steel.

Fire rated Mortice latch lock using material of melting point above 800? as per provisions of DIN 18521-1 Class 3. Tested to EN 12209 for 2L cycles for modrate to heavy usage with 55mm backset, 20mm square forend including strike plate in satin stainless steel as per EN 12209. CE marked

Electromagnetic Lock with Armature Plate fitted in the Door Leaf.With Built in Reed contact. Surface Mounted with fixing set comprising an L-bracket for flush - mounting on the push side or Z bracket for pull side, Holding force of 300 Kg.12V( 500mA)/ 24V (250mA) DC. Fail Safe Security. Satin anodised aluminium finish.

5 pin Lock the door, Lock the door > Euro profile cylinder (EPC) with both side key function suitable length 60/70/80/90mm as per door thickness and escutcheon (EPC size = door thickness + 22 mm). in satin nickel plated finish with 3 keys.As per EN 1303 tested for 100000 cycle and Suitable for use on fire resistant and smoke control doors.( Grade 6 & B) (If Under Master keyed - MK is mentione else mentioned as Non Master key - NMK)

Micro switch for Carry Bar panic harwdare for actuation of visual and audiable signal, contact rating: 48V DC max.3A

Floor stop half dome with 45mm dia with fixing accessories, in satin Chrome

Escutcheons prepared for euro profile cylinder suitable for dead lock in satin stainless steel.

Request to Exit Switch

1000 x 1000 x 1.5 mm SSS 304 grade in satin satinless steel radius corner armor plate drilled and counter sunk srews, length shall be 5mm short of the shutter width.

Centre hung accessories for double action door Top centre with bottom strap , for wood door. Non handed. Mill finish

Rack and pinion door closer with hold open arm - power ajustable EN size 2/3/4 by altering postion of door closer and independent closing valves, latching speed adjustable by pinion arm at 90?, and all adjustment screws face fixed. Silver finish. As per EN 1154 marking suitable for door width 850mm - 1100mm and weight upto 80 Kgs.

Fire rated Concealed integrated cam action Door Closer with slide channel arm including opening angle limiter upto 120?. Spring the guide rail is only visible when the door is open. For right and left closing doors, up to 130 kg leaf weight and width 850 mm - 1100 mm leaf Spring size EN 2-4 adjustable closing force, closing speed, latching force and back check as per EN 1154 marking and CE marked. Silver finish. Non-handed version

Floor Spring with adjustable power EN 3 and closing speed. with full backcheck with cement box, std. spindle (extended spindle for special floor height requirements) and SSS cover top plate. With hold open. Suitable for door width = 950mm , Max door Weight = 150 Kg As per EN 1154 and CE marking. Finish: Satin stainless steel.

Fire rated Emergency escape lock using material of melting point above 800? as per DIN 18250 EN 179,Tested to 2L cycles for modrate to heavy usage for use on fire and smoke check doors, 9mm spindle follower, 55mm Backset, 72mm CTC, Finish = SSS. as per. CE marked

Electromagnetic Lock with Armature Plate fitted in the Door Leaf.with ?door locked? feedback function. Surface Mounted with with fixing set comprising an L-bracket for flush - mounting on the push side or Z bracket for pull side Holding force of 530Kg.12V(500mA)/ 24V (250mA) DC. Fail Safe Security. Satin anodised aluminium finish,

5 pin Lock the door, Lock the door > Euro profile cylinder (EPC) with both side key function suitable length 60/70/80/90mm as per door thickness and narrow style escutcheon (EPC size = door thickness + 22 mm). in satin nickel plated finish with 3 keys.As per EN 1303 tested for 100000 cycle and Suitable for use on fire resistant and smoke control doors.( Grade 6 & B) (If Under Master keyed - MK is mentione else mentioned as Non Master key - NMK)

Micro switch for Push bar for actuation of visual and audiable signal, contact rating: 48V DC max.3A