Search Box (All Fields Optional)
| Thumbnails | Products |
|---|---|
 |
FR Floor Spring EN 3-6
Fire rated Floor Spring with adjustable power EN 2-4 and closing speed. with full backcheck with cement box, std. spindle (extended spindle for special floor height requirements) and SSS cover top plate. Non-hold open. Suitable for door width = 950mm - 1400mm, Max door Weight = 300 Kg As per EN 1154 and CE marking. Finish: Satin stainless steel. |
 |
Frameless Glass door Corner Hinge LH
Corner Hinge Set LH, Finish:- AL silver anodized ( plz specify special finish ) |
 |
Frameless Glass door Corner Hinge RH
Corner Hinge Set RH, Finish:- AL silver anodized ( plz specify special finish ) |
 |
Frameless Glass door Hinge
Hinges for internal 8-10 mm thick toughned glass doors, heavy duty hinge 80Kg with screw on frame portion, Finish:- AL silver anodized ( plz specify special finish ) |
 |
Frameless Glass Doors With Manet
Standards: Door closer with door fitting : EN 1154 (Tested for 500,000 cycles operations)
Door dimension: upto 1200mm (Width) upto 120 Kgs (Weight) Glass thickness: Glass door - 8 / 12 mm toughened swing door as well sliding door |
 |
Frameless Glass Doors With Patch Fittings
Standards: Door closer with patch fittings : EN 1154 (Tested for 500,000 cycles operation) Locks : DIN 18251 (Class 3 : Type-test with 50,000 locking bolt operating cycles) Lock is tested by a neutral testing institute with 100,000 locking bolt operating cycles.
Door dimension: upto 1300mm (Width) & upto 2700mm (Height) upto 130 Kgs (Weight) Glass thickness: Glass door - 10/12mm toughened (Higher glass thickness on request) Finish : Satin Stainless Steel Finish (Standarad) Black Finish (On Request) |
 |
|
 |
|
 |
Glass Door Assemblies (Magnet)
Standards: Door with fitting & floor spring : EN 1154 (tested for 500,000 cycles operations)
Door dimension: upto 1200mm (Width) upto 120 Kgs (Weight) Glass thickness: Glass door - 10 / 12 mm |
 |
Glass Door Assemblies With Mundus Patch Fittings (Comfort)
Standards: Top patch : EN 1154 Bottom patch : EN 1154 Overpanel patch : EN 1154 Floor spring : EN 1154 (Tested for 500,000 cycles operation) Inhouse-Test according to EN 12400:5,00,000
Door dimension: upto 1100mm (Width) & upto 2500mm (Height) upto 150Kgs (Weight) Glass thickness: Glass door - 8-12 mm Toughened Finish : Satin Stainless, Polished Stainless Steel, Alu. Silver, Alu. White, Niro Dark , Brass Antique, Black Bronze, Glass White and Glass Black Bottom Insert Adjustement : 3 Dimensional (Diagonal, Horizontal & Vertical |
 |
Glass Door Assemblies With Mundus Patch Fittings (Premium)
Standards: Top patch : EN 1154 Bottom patch : EN 1154 Overpanel patch : EN 1154 Floor spring : EN 1154 (Tested for 500,000 cycles operation) Inhouse-Test according to EN 12400:1,000,000
Door dimension: upto 1300mm (Width) & upto 2600mm (Height) upto 200 Kgs (Weight) Glass thickness: Glass door - 8-22 mm Toughened & Laminted Safety Glass Finish : Satin Stainless, Polished Stainless Steel, Alu. Silver, Alu. White, Niro Dark , Brass Antique, Black Bronze, Glass White and Glass Black Bottom Insert Adjustement : 3 Dimensional (Diagonal, Horizontal & Vertical |
 |
|
 |
GLASS PARTITION - ALTERRA DEMOUNTABLE PARTIONING SYSTEM-ALT 50
The ALTERRA Demountable Partition System offers solutions for interior glass partitions with minimal framing. The ALT50 wall profiles are available in 50x30mm for single glazing. Door rebate frames, sized at 50x53mm, serve as a common door profile for both swing and sliding doors. Swing door profiles (70x35mm) are compatible with self-closing hinges for frameless and framed single-action doors up to 100 kg. Sliding door profiles (70x35mm) support manual sliding door elements up to 80 kg weight capacity. The system is suitable for installation to walls, floors, and ceilings.
The system includes intermediate slim junction profiles for glass-to-glass vertical joints, 90-degree L junction, and T junction profiles, adaptable to various room configurations. Additional components include overhead panel profiles, sliding door inline tracks, recess profiles, pocket door recess profiles, pinch-free profiles for pivot doors, solid wall interface profiles, carpet-to-tile transition profiles, Brooklyn stick-on profiles, and wide junctions (T, 180, 90 degrees) for diverse assembly designs.
ALT50 profiles accommodate fixed partition glass thicknesses of 10/12/13.52mm and glass door thickness 10, 12 and stile/timber thickness 35mm. Profiles are supplied in EV1/Black anodized finish, complete with necessary clips, gripper clamps, connectors, seals, dormakaba hardware and accessories as per the client design requirement.
The system provides benefits such as concealed sealing, electrical cable routing, carpet edge covering, adjustable covers, concealed door hardware mounting, enhanced stability with gripper clamps, and improved acoustic performance. The product is environmentally friendly, holding an EPD declaration.
Key Features and Specs:
System: ALTERRA Demountable Partition System (ALT50)
Application: Interior glass partitions
Wall Profiles: ALT50, 50x30mm (single glazing)
Door Rebate Frames: 50x53mm (common for swing and sliding doors)
Door Profiles: 70x35mm
Swing Door Capacity: Up to 100 kg, with self-closing hinges (frameless and framed single action)
Sliding Door Capacity: Up to 80 kg (manual)
Installation: Wall, floor, and ceiling
Junction Profiles: Slim (glass-to-glass), 90-degree L, T junction
Additional Profiles/Components: Overhead panel, sliding door inline track, recess, pocket door recess, pinch-free (pivot door), solid wall interface, carpet-to-tile transition, Brooklyn stick-on, wide junctions (T, 180, 90 degrees)
Fixed Partition Glass Thickness: 10/12/13.52mm
Door Glass/Stile/Timber Thickness: 10, 12, and 35mm
Finish: EV1/Black anodized
Included: Clips, gripper clamps, connectors, seals, dormakaba hardware, accessories (per client design)
Benefits: Concealed sealing, electrical cable routing, carpet edge covering, adjustable covers, concealed door hardware mounting, stability (gripper clamp), acoustic performance
Environmental: EPD declaration
Area of Application: Office cabins, Corridor Wall, Conference room, Stairwall/Lobby
Dimensions:
Glass thickness: 10mm, 12mm & 13.52mm toughened glass, Concealed sealing (No visible Gaskets/Seals) with stability gripper clamp |
 |
GLASS PARTITION - ALTERRA DEMOUNTABLE PARTIONING SYSTEM-ALT SGU100
The ALTERRA Demountable Partition System offers solutions for interior glass partitions with minimal framing. The ALT100 SGU wall profiles are available in 100x30mm for single & double glazing. Door rebate frames, sized at 100x30mm, serve as a common door profile for both swing and sliding doors. Swing door profiles (70x35mm) are compatible with self-closing hinges for frameless and framed single-action doors up to 100 kg. Sliding door profiles (70x35mm) support manual sliding door elements up to 80 kg weight capacity. The system is suitable for installation to walls, floors, and ceilings.
The system includes intermediate slim junction profiles for glass-to-glass vertical joints, 90-degree L junction, and T junction profiles, adaptable to various room configurations. Additional components include overhead panel profiles, sliding door inline tracks, recess profiles, pocket door recess profiles, pinch-free profiles for pivot doors, solid wall interface profiles, carpet-to-tile transition profiles, Brooklyn stick-on profiles, and wide junctions (T, 180, 90 degrees) for diverse assembly designs.
ALT100SGU profiles accommodate fixed partition glass thicknesses of 10/12/13.52mm and glass/stile/timber door thicknesses of 10, 12, and 35mm. Profiles are supplied in EV1/Black anodized finish, complete with necessary clips, gripper clamps, connectors, seals, dormakaba hardware, and accessories, tailored to client design requirements.
The system provides benefits such as concealed sealing, electrical cable routing, carpet edge covering, adjustable covers, concealed door hardware mounting, enhanced stability with gripper clamps, and improved acoustic performance. The product is environmentally friendly, holding an EPD declaration.
Key Features and Specs:
System: ALTERRA Demountable Partition System
Application: Interior glass partitions
Wall Profiles: ALT100 SGU, 100x30mm (single & double glazing)
Door Rebate Frames: 100x30mm (common for swing and sliding doors)
Door Profiles: 70x35mm
Swing Door Capacity: Up to 100 kg, with self-closing hinges (frameless and framed single action)
Sliding Door Capacity: Up to 80 kg (manual)
Installation: Wall, floor, and ceiling
Junction Profiles: Slim (glass-to-glass), 90-degree L, T junction
Additional Profiles/Components: Overhead panel, sliding door inline track, recess, pocket door recess, pinch-free (pivot door), solid wall interface, carpet-to-tile transition, Brooklyn stick-on, wide junctions (T, 180, 90 degrees)
Fixed Partition Glass Thickness: 10/12/13.52mm
Door Glass/Stile/Timber Thickness: 10, 12, and 35mm
Finish: EV1/Black anodized
Included: Clips, gripper clamps, connectors, seals, dormakaba hardware, accessories (per client design)
Benefits: Concealed sealing, electrical cable routing, carpet edge covering, adjustable covers, concealed door hardware mounting, stability (gripper clamp), acoustic performance
Environmental: EPD declaration
Area of Application: Office cabins, Corridor Wall, Conference room, Stairwall/Lobby
Dimensions:
Glass thickness: 10mm, 12mm & 13.52mm toughened glass, Concealed sealing (No visible Gaskets/Seals) with stability gripper clamp |
|
|
GLASS PARTITION - ALTERRA DEMOUNTABLE PARTIONING SYSTEM-ALT-DGU100
The ALTERRA Demountable Partition System offers solutions for interior glass partitions with minimal framing. The ALT100 DGU wall profiles are available in 100x30mm for single & double glazing. Door rebate frames, sized at 100x30mm, serve as a common door profile for both swing and sliding doors. Swing door profiles (70x35mm) are compatible with self-closing hinges for frameless and framed single-action doors up to 100 kg. Sliding door profiles (70x35mm) support manual sliding door elements up to 80 kg weight capacity. The system is suitable for installation to walls, floors, and ceilings.
The system includes intermediate slim junction profiles for glass-to-glass vertical joints, 90-degree L junction, and T junction profiles, adaptable to various room configurations. Additional components include overhead panel profiles, sliding door inline tracks, recess profiles, pocket door recess profiles, pinch-free profiles for pivot doors, solid wall interface profiles, carpet-to-tile transition profiles, Brooklyn stick-on profiles, and wide junctions (T, 180, 90 degrees) for diverse assembly designs.
ALT100 DGU profiles accommodate fixed partition glass thicknesses of 10/12/13.52mm and glass door thickness 10, 12 and stile/timber thickness 35mm. Profiles are supplied in EV1/Black anodized finish, complete with necessary clips, gripper clamps, connectors, seals, dormakaba hardware, and accessories, tailored to client design requirements.
The system provides benefits such as concealed sealing, electrical cable routing, carpet edge covering, adjustable covers, concealed door hardware mounting, enhanced stability with gripper clamps, and improved acoustic performance. The product is environmentally friendly, holding an EPD declaration.
Key Features and Specs:
System: ALTERRA Demountable Partition System (DGU)
Application: Interior glass partitions
Wall Profiles: ALT100 DGU, 100x30mm (single & double glazing)
Door Rebate Frames: 100x30mm (common for swing and sliding doors)
Door Profiles: 70x35mm
Swing Door Capacity: Up to 100 kg, with self-closing hinges (frameless and framed single action)
Sliding Door Capacity: Up to 80 kg (manual)
Installation: Wall, floor, and ceiling
Junction Profiles: Slim (glass-to-glass), 90-degree L, T junction
Additional Profiles/Components: Overhead panel, sliding door inline track, recess, pocket door recess, pinch-free (pivot door), solid wall interface, carpet-to-tile transition, Brooklyn stick-on, wide junctions (T, 180, 90 degrees)
Fixed Partition Glass Thickness: 10/12/13.52mm
Door Glass/Stile/Timber Thickness: 10, 12, and 35mm
Finish: EV1/Black anodized
Included: Clips, gripper clamps, connectors, seals, dormakaba hardware, accessories (per client design)
Benefits: Concealed sealing, electrical cable routing, carpet edge covering, adjustable covers, concealed door hardware mounting, stability (gripper clamp), acoustic performance
Environmental: EPD declaration
Area of Application: Office cabins, Corridor Wall, Conference room, Stairwall/Lobby.
Dimensions:
Glass thickness: 10mm, 12mm & 13.52mm toughened glass, Concealed sealing (No visible Gaskets/Seals) with stability gripper clamp |
 |
Glass Partition - Alterra Demountable Partioning System-ALT27
1.Office cabins 2. Corridor Wall 3. Conference room 4. Stairwall/Lobby
Area of Application: 1.Office cabins 2. Corridor Wall 3. Conference room 4. Stairwall/Lobby
Glass thickness: 10mm &12mm toughened glass Concealed sealing (No visible Gasekts/Seals) |
 |
GLASS PARTITION - PATCH FITTINGS / WALL CONNECTING PROFILE
The system involves the installation of frameless partitions using 10/12 mm clear toughened glass, secured with dormakaba stainless steel patch fittings and/or wall connecting profiles (PT/WCP standard).
Patch fittings include:
PT 90 / 91 / 92
WCP secure / non-secure central connector
PT-91 corner connector
PT-92 side connector
SM1305 - glass to glass center connector
The installation also includes perimeter sealing of glass-to-glass joints with silicon sealants. The work is to be completed in all respects as per approved drawings and to the satisfaction of the engineer-in-charge/architect consultant.
Key Features and Specs:
Partition Type: Frameless fixed glass partition
Fittings:
Stainless steel patch fittings (dormakaba PT series)
Stainless steel wall connecting profiles (dormakaba WCP series)
Glass: 10 - 12mm clear toughened glass
Fittings Included:
PT 90 / 91 / 92
WCP secure / non-secure central connector
PT-91 corner connector
PT-92 side connector
SM1305 - glass to glass center connector
Sealing: Perimeter sealing of glass-to-glass joints with silicon sealants
Installation: As per approved drawings
Approval: To the satisfaction of engineer-in-charge/architect consultant
Area of Application: Office area, Internal partition,
Dimensions:
Glass thickness: 10 - 12mm toughened glass |
 |
GLASS PARTITION - POINT FITTINGS
The system involves the installation of frameless partitions using 8/10/12 mm clear toughened glass, secured with dormakaba stainless steel patch fittings and/or wall connecting profiles (PT/WCP standard).
Patch fittings include:
PT 90 / 91 / 92
WCP secure / non-secure central connector
PT-91 corner connector
PT-92 side connector
SM1305 - glass to glass center connector
The installation also includes perimeter sealing of glass-to-glass joints with silicon sealants. The work is to be completed in all respects as per approved drawings and to the satisfaction of the engineer-in-charge/architect consultant.
Key Features and Specs:
Partition Type: Frameless fixed glass partition
Fittings:
Stainless steel patch fittings (dormakaba PT series)
Stainless steel wall connecting profiles (dormakaba WCP series)
Glass: 8/10/12 mm clear toughened glass
Fittings Included:
PT 90 / 91 / 92
WCP secure / non-secure central connector
PT-91 corner connector
PT-92 side connector
SM1305 - glass to glass center connector
Sealing: Perimeter sealing of glass-to-glass joints with silicon sealants
Installation: As per approved drawings
Approval: To the satisfaction of the engineer-in-charge/architect consultant
Area of Application: Office area, Internal partition.
Dimensions:
Glass thickness: 12mm toughened glass |
 |
Grab Bar of Length 300mm
Grab Bar for wall fixing of Length 300mm, 25mm Diameter in Satin stainless Steel Finish. |
 |
Grab Bar of Length 600mm
Grab Bar of Length 600mm, 25mm Diameter in Satin stainless Steel Finish. |
