Search Box (All Fields Optional)
| Thumbnails | Products |
|---|---|
 |
Half cylinder with one side key EPC with narrow style escutcheon -MK
5 pin Lock the door, Lock the door > Euro profile cylinder (EPC) with both side key function suitable length 60/70/80/90mm as per door thickness and narrow style escutcheon (EPC size = door thickness + 22 mm). in satin nickel plated finish with 3 keys.As per EN 1303 tested for 100000 cycle and Suitable for use on fire resistant and smoke control doors.( Grade 6 & B) (If Under Master keyed - MK is mentione else mentioned as Non Master key - NMK) |
 |
Half cylinder with one side tumb turn with escutcheon
5 pin Lock the door, Lock the door > Euro profile cylinder (EPC) with both side key function suitable length 60/70/80/90mm as per door thickness and escutcheon (EPC size = door thickness + 22 mm). in satin nickel plated finish with 3 keys.As per EN 1303 tested for 100000 cycle and Suitable for use on fire resistant and smoke control doors.( Grade 6 & B) (If Under Master keyed - MK is mentione else mentioned as Non Master key - NMK) |
 |
Half cylinder with one side tumb turn with narrow style escutcheon
5 pin Lock the door, Lock the door > Euro profile cylinder (EPC) with both side key function suitable length 60/70/80/90mm as per door thickness and narrow style escutcheon (EPC size = door thickness + 22 mm). in satin nickel plated finish with 3 keys.As per EN 1303 tested for 100000 cycle and Suitable for use on fire resistant and smoke control doors.( Grade 6 & B) (If Under Master keyed - MK is mentione else mentioned as Non Master key - NMK) |
 |
Half Height Sensor Barriers
The Half Height Sensor Barrier HSB-E07 is a swing barrier designed for office and administrative buildings, featuring low-energy servo drives with tooth holding brake technology and polycarbonate wings with toughened glass side walls, achieving an MCBF of 10 million cycles (650mm width) or 8 million cycles (900mm width). Electrically controlled in both directions for enhanced safety, it includes a basic sensor system for passage monitoring and obstruction detection, automatic reset after power failure with immediate access area security, and the ability to be locked in any position while opening under load for panic situations, all while maintaining low standby power consumption (17 VA) and offering customizable parameters. Its modular design provides various adaptation possibilities, including suitability for emergency and escape routes, barrier-free access options (900mm passage width), protection against entry from below, trolley passage, and child detection (Security level 2), with total widths of 1070/1320mm (including a handicap lane), a passage width of 650/900mm (handicap lane), an interlock height of 945mm, and an interlock length of 1660mm, integrating the ETS 22 control system and power supply (110-230 VAC, 50/60 Hz) Dimensions: Total Width: 1070/1320mm(Handicap lane) Passage Width: 650/900mm(Handicap lane) Interlock height: 945mm Interlock length: 1660mm |
 |
Handicap Restroom set
Complete Set including Locking set fail safe Electric Strike, Dummy Latch, IRS Safety Sensor & Operating Switch |
 |
Hold open unit for concealed door closer / slide arm
Mechanical hold open unit for concealed door closers / slide arms (not to be used with fire rated doors) |
 |
|
 |
HORIZONTAL SLIDING WALL - HSW( Easy Safe)
The HSW-G(ES) system is a manual toughened glass sliding shop front system without a floor guide. It features an aluminum track rail (72 x 75 mm) and a stacking section, prepared for underbolting to an aligned substructure (provided by others). Panels are equipped with easy-action plastic-tyred track rollers and top brush seals on both sides. The system incorporates two-part glazing rails (top and bottom) that can be aligned with the panels using alternate-side screw fixings. The installed panels offer a height adjustment range of ± 5 mm. The system accommodates glass thicknesses from 10 to 19mm, specifically: 10mm to 12mm with line profiles, and 13.52mm to 19mm without line profiles. Line profiles, designed to make doors draught-proof, are individually manufactured and must be considered during the horizontal wall system design.
Key Features and Specs:
System Type: Manual toughened glass sliding shop front
Floor Guide: No floor guide
Track Rail: Aluminum, 72 x 75 mm
Substructure: Underbolting to aligned substructure (by others)
Panel Movement: Individual Driving
Track Rollers: Easy-action plastic-tyred
Seals: Top brush seals on both sides of panels
Glazing Rails: Two-part (top and bottom), aligned with panels using alternate-side screw fixings
Height Adjustment: ± 5 mm
Glass Thickness: 10 to 19mm; 10mm to 12mm (with line profile); 13.52mm to 19mm (without line profile)
Line Profiles: Individually manufactured for draught-proofing
Max. Panel Width: 1250mm
Max. Panel Height: 4000 mm
Max. Panel Weight: 150 kg (for both swing & sliding panels)
Panel Stacking: Parallel & Perpendicular, based on site conditions.
Panel Support: 2 Roller Support
Glass Type: TSG & LSG
Profile Finish: Similar to Satin Stainless Steel Finish
Max. Panels per Side:Â One-side parking: 10 panels; Double-side parking: 20 panels
Area of Application:Â Individual Bungalows / Residences / Villas/Hotels / Spas / Resorts/ Corporate Offices / IT Parks/ Retail Outlets / Shopping Malls
Advantages: Total space management
Dimensions:
Max panel width & height: 1250mm (width) 4000 mm (Height)
Panel weight: 150 kg (Swing & Sliding Panel) |
 |
Illuminating Running man sign
380 X 190 mm illuminating Running man sign |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
Kick plate 1000 x 200 x 1.5 mmSSS 304
1000 x 200 x 1.5 mm SSS 304 grade in satin satinless steel radius corner kick plate drilled and counter sunk srews, length shall be 5mm short of the shutter width. |
|
|
Kick plate 1000 x 200 x 1.5 mmSSS 316
1000 x 200 x 1.5 mm SSS 316 grade in satin satinless steel radius corner kick plate drilled and counter sunk srews, length shall be 5mm short of the shutter width. |
|
|
Kick plate 1200 x 200 x 1.5 mmSSS 304
1200 x 200 x 1.5 mm SSS 304 grade in satin satinless steel radius corner kick plate drilled and counter sunk srews, length shall be 5mm short of the shutter width. |
|
|
Kick plate 1200 x 200 x 1.5 mmSSS 316
1200 x 200 x 1.5 mm SSS 316 grade in satin satinless steel radius corner kick plate drilled and counter sunk srews, length shall be 5mm short of the shutter width. |
 |
Kick plate 900 x 150 x 1.5 mmSSS 316
900 x 150 x 1.5 mm SSS 316 grade in satin satinless steel radius corner mop plate drilled and counter sunk srews, length shall be 5mm short of the shutter width. |